Product Research
  • Y24L_FB
Yoke Type cam followers are intended primarily for applications where loading conditions exceed the capabilities of stud type cam followers, or where clevis mounting is desired. Clevis mounting provides support on both sides of the cam follower and permits use of a high strength pin.
Crowned Outer Rings are used to minimize outer ring thrusting in applications where the axis of the cam follower is not parallel to the surface of the track or is skewed relative to the direction of travel. Crowned outer rings are a good selection for use with curved or circular tracks. In well aligned applications, crowned outer rings can cause accelerated track wear.
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Inside Diameter

Outside Diameter

Overall Width

Roller Width

Speed Limit

Dynamic Load Rating

Static Load Rating

N/A 0.25 in N/A 0.75 in N/A 0.5625 in N/A 0.5 in N/A 3930 rpm N/A 1800 lbf N/A 4150 lbf
N/A 0.25 in N/A 0.88 in N/A 0.5625 in N/A 0.5 in N/A 3930 rpm N/A 1800 lbf N/A 4150 lbf
N/A 0.31 in N/A 1.00 in N/A 0.6875 in N/A 0.625 in N/A 3140 rpm N/A 2300 lbf N/A 6150 lbf
N/A 0.31 in N/A 1.13 in N/A 0.6875 in N/A 0.625 in N/A 3140 rpm N/A 2300 lbf N/A 6150 lbf
N/A 0.38 in N/A 1.25 in N/A 0.8125 in N/A 0.75 in N/A 2620 rpm N/A 4200 lbf N/A 8500 lbf
N/A 0.38 in N/A 1.38 in N/A 0.8125 in N/A 0.75 in N/A 2620 rpm N/A 4200 lbf N/A 8500 lbf
N/A 0.44 in N/A 1.50 in N/A 0.9375 in N/A 0.875 in N/A 2250 rpm N/A 5000 lbf N/A 11300 lbf
N/A 0.44 in N/A 1.63 in N/A 0.9375 in N/A 0.875 in N/A 2250 rpm N/A 5000 lbf N/A 11300 lbf
N/A 0.50 in N/A 1.75 in N/A 1.0625 in N/A 1 in N/A 1970 rpm N/A 6400 lbf N/A 15850 lbf
N/A 0.50 in N/A 1.88 in N/A 1.0625 in N/A 1 in N/A 1970 rpm N/A 6400 lbf N/A 15850 lbf
N/A 0.63 in N/A 2.00 in N/A 1.3125 in N/A 1.25 in N/A 1570 rpm N/A 9600 lbf N/A 21200 lbf
N/A 0.63 in N/A 2.25 in N/A 1.3125 in N/A 1.25 in N/A 1570 rpm N/A 9600 lbf N/A 21200 lbf
N/A 0.75 in N/A 2.50 in N/A 1.5625 in N/A 1.5 in N/A 1310 rpm N/A 12800 lbf N/A 33000 lbf
N/A 0.75 in N/A 2.75 in N/A 1.5625 in N/A 1.5 in N/A 1310 rpm N/A 12800 lbf N/A 33000 lbf
N/A 1.00 in N/A 3.00 in N/A 1.8125 in N/A 1.75 in N/A 1060 rpm N/A 17000 lbf N/A 49900 lbf
N/A 1.25 in N/A 4.00 in N/A 2.3125 in N/A 2.25 in N/A 940 rpm N/A 30000 lbf N/A 89550 lbf
N/A 2.25 in N/A 6.00 in N/A 3.375 in N/A 3.25 in N/A 1060 rpm N/A 62900 lbf N/A 165500 lbf
N/A 1.00 in N/A 3.25 in N/A 1.8125 in N/A 1.75 in N/A 1060 rpm N/A 17000 lbf N/A 49900 lbf
N/A 1.13 in N/A 3.50 in N/A 2.0625 in N/A 2 in N/A 980 rpm N/A 24300 lbf N/A 63250 lbf
N/A 1.75 in N/A 5.00 in N/A 2.875 in N/A 2.75 in N/A 720 rpm N/A 47200 lbf N/A 136000 lbf
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1